Source: https://mayphus.org/entries/mechanical-competition/
Title: These photos are from a mechanical competition in November 2016.
Metadata: {"date":"2016-11-10","id":"mechanical-competition","kind":"note","language":"en","links":[],"locale":"en","route":"/entries/mechanical-competition/","slug":"entries/mechanical-competition","tags":["robotics"],"topic":"making","type":"note"}

These photos are from a mechanical competition in November 2016.
  
 2016-11-10 

These photos are from a mechanical competition in November 2016. I built a tall wheeled robot from aluminum plate, steel rods, laser-cut wheels, gears, an AT89X51 controller, and ultrasonic sensors. The workbench photos show the mechanism and electronics coming together; the final photo shows the robot on the competition track.
 
A tall homemade wheeled robot under construction on a crowded electronics workbench. (https://mayphus.org/media/notes/mechanical-competition-workbench.jpg)  (https://mayphus.org/media/notes/mechanical-competition-workbench.jpg) Close view of the robot's large laser-cut wheels, gears, AT89X51 controller board, batteries, wiring, and ultrasonic sensor. (https://mayphus.org/media/notes/mechanical-competition-drive.jpg)  (https://mayphus.org/media/notes/mechanical-competition-drive.jpg) The completed tall wheeled robot standing on the polished floor of a mechanical competition track. (https://mayphus.org/media/notes/mechanical-competition-track.jpg)  (https://mayphus.org/media/notes/mechanical-competition-track.jpg)